Metric Grease Fittings
Can't find what your looking for then give us a call, fax or use the On-line Form.
Currently less than 1% of our products are posted on this website.
Bins, Drawers and Storage
Liquid & Chemical Products
Quick Order Form
Products at a Glance
Terms and Conditions
About us & Contact us
Text from Images: metric grease fitting, metric, grease, fittings, grease fittings, M6 x .75, MG x 1.00, M6 x 1.00, M7 x 1.00, M8 x .75, M8 x 1.00, M8 x 1.25, M10 x 1.00, M10 x 1.50, M12 x 1.50, R 1/8 Straight, R 1/4 Straight, M6 Drive-Fit, M8 Drive-Fit, M10 Drive-Fit, Square Body, M10 x 1.25, R 1/8 45º Angle, R 1/4 45º Angle, R 1/8 90º Angle, R 1/4 90º Angle, Thread Count, Thread Pitch, millimeters, ISO Coarse, ISO Fine, Taper Pipe, Parallel Pipe, BSPF, NPS, BSPT, BSF, BSW Whitworth, metric, If you don’t see the size or type that you need, call us and we’ll find it for you., (519) 681-5931, (519)681-5931, 519-681-5931, (Threads per Inch), Part #, Description, Alemite, Lincoln, G.M., GM, brass, stainlesss, steel, Height, Shank, Hex, Standard, Straight, Short, Super Long, Extra Long, No Ball Check, Long, Long Shank, Dust Cap, 30 Angle, 30 degree Angle Long, 30º Angle, 45º Angle, 65º Angle, 90º Angle, 45 Angle, 45 degree Angle, 65 Angle, 65 degree Angle Long, 65 Extra Long, 67-1/2º Angle, 90 Angle, 90 degree angle Long, Self-Forming Taper Thread, Self-drilling, self-tapping, self-threading, 1/4", 1/8", Male Thread, No Ball, Thread Forming Taper, hex body, 9mm sqr. M6, M7, M8, M10, M12, x0.75, x1.0, x1.25, x1.5, R 1/8", R 1/4", straight, drive-fit, drivfit, driveit, sqr., sqr body, square body, M6 drive-fit, M8 drive-fit, M10 drive-fit, M8, drive-fit, M6 drivefit, M8 drivefit, M10 drivefit, 45 angle, 45 deg., 45 degree angle, 45deg., 45 degrees, 45 degree, 45, degree, angle, 45 deg. angle, 90 angle, 90 deg., 90 degree angle, 90deg., 90 degrees, 90 degree, 90, degree, angle, 90 deg. angle, degree angle, Grease Fitting, metric, Fasteners, greese, fittings, drive fit, drive, fit, drivefit, greasenipples, nipples, greasing, hydraulic, lube, zerks, Straight, 45°, 90°, Grease Fittings, F0H1 - H1 Straight, F0H2 - H2 45°, F0H3 - H3 90°, Technical Drawing, Type, Size, height, hieght, approximate, shaft, shank, threaded, threading, approx., hex, across the flats, AF, Pkg., Order #, Distributors, Metric Part, Metric., Métrique., Hydraulic Grease Fittings, H1, repair, All Dimensions, except, Dia. x Pitch, are nominal, commonly referred to as, Metric Zerk Fittings, products, complete line, metric, grease fittings, stock, Product Info, about 40 types or sizes shown, Metric grease fittings, available in, steel, stainless steel, Metric Zerk Fittings, Metric Lubrication Fittings, Metric Hydraulic Fittings, Metric Zerks, available. GF8701, GF8901, GF9301, GF7045, GF7045SQR, GF7445, GF7445SQR, GF9345, GF7090, GF7490, GF9390, 113-042, GF-8701, 113-043, 113-044, GF-8901, 113-014, GF-9301, 113-013, 113-046, 113-035, 113-049, 113-047, 113-064, 113-065, 113-038, 113-050, GF-7045, GF-7045SQR, 113-051, 113-036, GF-7445, GF-7445SQR, 113-052, GF-9345, 113-045, 113-053, 113-054, 113-055, 113-056, 113-057, GF-7090, 113-058, 113-059, GF-7490, 113-060, GF-9390, 113-037, 113-061, 113-062, 113-063, .25mm, .5mm, .75mm, 1mm, 1.25mm, 1.5mm, 1.75mm, 2mm, 2.25mm, 2.5mm, 2.75mm, 3mm, 3.5mm, 4mm, 4.5mm, 5mm, 5.5mm, 6mm, 6.5mm, 7mm, 7.5mm, 8mm, 8.5mm, 9mm, 9.5mm, 10mm, 10.5mm, 11mm, 11.5mm, 12mm, 12.5mm, 13mm, 13.5mm, 14mm, 14.5mm, 15mm, 15.5mm, 16mm, 16.5mm, 17mm, 17.5mm, 18mm, 18.5mm, 19mm, 19.5mm, 20mm, 20.5mm, 21mm, 21.5mm, 22mm, 23mm, 23.5mm, 24mm, 24.5mm, 25mm, 25.5mm, 26mm, 26.5mm, 27mm, 27.5mm, 28mm, 28.5mm, 29mm, 29.5mm, 30mm, 30.5mm, 31mm, 32mm, 33mm, 34mm, 35mm, 36mm, 37mm, 38mm, 39mm, 40mm, 45mm, 50mm, 55mm, 60mm, 65mm, 70mm, 75mm, 80mm, 85mm, 90mm, 95mm, 100mm, 105mm, 110mm, 115mm, 120mm, 125mm, 130mm, 135mm, 140mm, 145mm, 150mm
[ Top of Page ]
©2007 Facca Fasteners Limited. All Rights Reserved.